ISPM 15 Treatment and Pallet Marking

Close-up of an IPPC mark with GB FC107 and HT on a pallet block
Close-up of an IPPC mark with GB FC107 and HT on a pallet block

What to check before ordering

When checking an ISPM 15 pallet, look for a legible treatment mark and ask the supplier to confirm the applicable treatment and marking. Our supplied photos include examples bearing an IPPC symbol, GB country code, producer identifier and HT treatment code. Photographs illustrate markings but do not establish the current treatment status of another pallet or independently verify supplier authorisation. Specify moisture requirements separately if kiln drying is also needed.

Official wood packaging import and export guidance

Related pallet buying guides

Discuss your pallet requirements

Send dimensions, quantities, destination country and delivery postcode.

Call 07518 672676Email your pallet enquiry

How to tell if a pallet is heat treated

Check for a legible IPPC mark containing a country code, producer identifier and treatment code. HT identifies conventional heat treatment. A general “kiln dried” description or a photograph of another pallet does not confirm the status of the pallet you are buying.

What does ISPM 15 heat treatment mean?

For conventional heat treatment, the wood must reach at least 56°C throughout its profile, including the core, for at least 30 continuous minutes. This is a plant health treatment, not a pallet load rating or a guaranteed moisture specification.

Do I need a treatment certificate?

The ISPM 15 mark provides certification; a separate certificate cannot replace the required mark. Confirm the packaging requirements for the destination and inspect the actual pallets before dispatch.

Forestry Commission guidance on treatment and marking.